Building product sourcing for builders
Direct factory supply for residential builders, joinery, stairs, flooring, tiles, windows and tapware, landed compliant so you’re not rewriting the schedule to protect margin.
The parts of supply that cost you money
- 01
Quoted high, bought higher
You priced the job off a schedule that was current months ago. Every supplier increase since then comes out of your margin, not the contract.
- 02
Substitutions you didn’t choose
The nominated product goes out of stock and a lesser one arrives. You get to explain it to the client.
- 03
Split deliveries
Six suppliers, six delivery windows, and freight paid over and over on part loads.
- 04
Compliance chased after the fact
Certification documents that don’t exist until the certifier asks for them, and product that can’t stay in the building.
What working with us looks like on a build
Priced off your schedule
Send the finishes schedule and drawings. We come back with landed cost per line, itemised.
Locked specification
What you approve is what’s manufactured. No packing-time substitutions.
One consolidated delivery
Multiple factories packed into one container and unloaded where you need it.
Inspected in production
Our own staff on the factory floor, with photographic reporting before anything ships.
Documentation pack
Certification and test evidence collected as part of the job, ready for your certifier.
One phone number
A licensed Australian tradesperson who understands a build program.
Imported is not the risk. Undocumented is.
Anyone can put a container on a boat. The reason imported product gets torn out of buildings is not where it was made. It is that nobody could produce the certificate when the certifier asked for it.
Compliance is specified before production starts, verified during it, and handed to you as a documentation pack with the delivery.
Engineered stone benchtops have been prohibited in Australia since 1 January 2025. We do not supply them under any circumstance. Where a stone-look benchtop is specified, we quote compliant alternatives, porcelain, sintered surfaces, natural stone or solid surface, and provide the silica content documentation for each.
Marks we specify to: WaterMark, WELS, RCM, AS 2047, AS 1288, AS/NZS 4386, AS 4586
Every order arrives with its own file: production inspection report, approved shop drawings, product certification, treatment and biosecurity paperwork, packing list and a landed cost breakdown.
A written summary of the standards that apply to imported building products in Australia. Ask for it in the form and we’ll email it through, or call 0481 228 836.
WaterMark
Plumbing and tapware
Every tap, mixer, waste, cistern and flexible hose that touches drinking water carries a WaterMark certificate, with WELS registration for flow and water efficiency. Uncertified plumbing product cannot legally be installed in Australia, and a plumber who fits it wears the liability.
RCM
Electrical and lighting
Lighting, fans, transformers and controls are supplied with a Regulatory Compliance Mark, an Australian responsible supplier on record, and the electrical safety and EMC test reports behind the mark. Our director is a licensed NSW electrical contractor, so this is checked by someone who signs off installations.
AS 2047
Windows and external doors
External windows and doors are tested and labelled to AS 2047 for water penetration, air infiltration and structural wind load against your site’s wind classification. Without it, no certifier will pass the building envelope.
AS 1288
Glass and glazing
Glass selection, thickness and grade in accordance with AS 1288, with Grade A safety glass where the code requires it, doors, low-level glazing, wet areas, balustrades and overhead applications.
AS/NZS 4386
Domestic kitchen assemblies
Cabinetry built to the material, moisture-resistance and construction requirements of AS/NZS 4386, with low-formaldehyde E0 or E1 board and documented hardware ratings.
AS 1657 / NCC
Stairs and balustrades
Staircases set out to NCC rise, going and going-to-rise limits, with balustrade heights, gap limits and load resistance verified before manufacture. Staircase geometry is the single most common cause of an imported product being rejected on site.
ISPM 15
Timber and quarantine
All timber packaging, pallets, crating and dunnage heat-treated or fumigated and stamped to ISPM 15. Product is packed to survive a biosecurity inspection so containers are not held, treated at your cost or re-exported.
Slip and fire
Flooring, tiles and linings
Slip resistance classified to AS 4586 for wet areas, ramps and external paving, and fire hazard properties documented for linings where the NCC calls for a group number.
Send us your finishes schedule.
We’ll price it line by line as a landed cost so you can compare it against what you’re paying now, before you commit to anything.